Sur-Ron/Segway Electronic Pedal Kit

• Strong. Left and right side brackets are made of a single piece to stand drops and tough conditions!
• This pedal kit will propel your ebike. A carefully designed plug and play system which connects to the cable coming from the throttle and to the one receiving the throttle signal.
• Cadence sensor to detect pedal speed.
• Three Position Handlebar Switch: Throttle only, pedals only or both (greater speed between pedals and throttle), the system will compare and transmit to the controller the higher speed.
• Compatible with chain or belt drives
• A pedal kit that lets your rear suspension WORK. The original pedal kit is located directly on the rear swingarm, therefore it does not spring your weight... you will feel the difference immediately going over obstacles, plus the turning is greatly improved!
• Plug and Play pedal kit fixed to the frame! You just disassemble the existing side brackets and install the pedal kit.
• Easy setup.  Adjust the kit to your bike using the stainless steel collars.  You may easily change between pedals or footpegs (and you have two footpeg positions!).  Just install the footpegs or the cranks without removing the pedal kit, you can also remove the spindle. You choose!
• Maintenance free.  New design is maintenance free since it has sealed cartridge bearings.
• Brace bar.  Also works as a brace bar
• Aluminium made in order to reduce weight.  With a weight of around 3 Lb (1.5 kg) it is lighter than the OEM kit.  The spindle is made of stainless steel.
• Durable Materials. Parts made of aluminum and stainless steel, water resistant switch, cadence sensor, connectors and control box.  It will last a long time. 
• Speed Control.  It will propel your ebike to 25 mph max* to comply with regulations.  It will reach more speed if pedaling in SPORT Mode.

Chain, split sprocket and freewheel NOT included in this version.

Speeds Table :

* With original sprocket, original controller, and flat road.